Close

Results 1 to 15 of 15
  1. #1
    Join Date
    May 2010
    Location
    South Jersey
    Posts
    860
    Rep Points
    1,537.7
    Mentioned
    26 Post(s)
    Rep Power
    16


    2 out of 2 members liked this post. Yes Reputation No

    Custom N54 Single Turbo Kit 335i

    Hey guys,

    I have moved on to a new platform (CTS-V), so I am selling my custom made single turbo kit. This fits a 335i, and may fit other cars; but I cannot confirm. This is a top-mount GT3582R w/ Tial .82 A/R housing and Tial 44mm wastegate (vented to atmosphere). It currently mates up to the factory style dual exhaust, or you can have an adapter fabricated to mate up to a single exhaust of your choice. I made 570WHP / 488WTQ @ 22psi through the stock exhaust with this setup. It will come with just about everything you need to install. You will need about 6' of 7/8" heater hose to relocate the coolant reservoir and probably a few miscellaneous fasteners and hose clamps. You will also need the tuning solution of your choice (I used JB4 G5 + Cobb) and a low pressure fuel pump solution. Feel free to P.M. me with any questions.

    ASKING PRICE: $3200 O.B.O. shipped to lower 48 states.

    The kit includes:

    Garrett GT3582R turbo w/ .82 Tial housing
    Tial 44mm external WG
    Manifold - TIG welded Schedule 10 304SS w/ 1.25" primaries to 1.50" secondaries to 2.00" collector (nominal pipes sizes)
    Downpipe
    Downpipe to dual exhaust adapter
    Dump tube
    Oil line & oil drain
    Water lines
    Block-offs for unused oil / water connections
    Modified coolant pipe for 6AT cars (nipple for trans cooler will need to be capped off for 6MT use)
    Driver's side coolant reservoir w/ level sensor, cap, and power steering reservoir relocation bracket
    Modified charge pipe w/ Tial BOV (clears driver's side coolant reservoir)
    Turbo mount K&N air filter
    PCV to filter hose
    V-band clamps
    Hot side charge pipe
    MAC boost solenoid w/ P&P harness
    N20 3.5 bar MAP sensor w/ P&P harness
    Heat shield

    NOTES:
    The following pictures show the CURRENT condition of the parts after they were removed from my car. The manifold has been freshly sandblasted to remove some light surface rust, and can be coated, wrapped, or just left bare. The long O2 sensor standoffs were designed to protect the sensors from excessive heat (but the tubes are dual chambered to draw plenty of exhaust gasses to the sensor to maintain accuracy). This has been designed to connect to an aftermarket intercooler with 2.5" silicone couplers. I built this kit myself; but I am not a tuning shop or hardware manufacturer, so there are no warranties provided. I cannot sepparate any components at this time. I can accept PayPal or money order. Thanks for looking!!! Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

  2. #2
    Join Date
    Sep 2011
    Posts
    1,218
    Rep Points
    2,201.9
    Mentioned
    25 Post(s)
    Rep Power
    23


    Yes Reputation No
    Your kit looks great!
    Change is constant

  3. #3
    Join Date
    Jul 2011
    Location
    Omaha, NE
    Posts
    80
    Rep Points
    150.9
    Mentioned
    1 Post(s)
    Rep Power
    2


    Yes Reputation No
    Is that the real deal Garrett GT3582R turbo or an E-Bay knock off?
    Do you have any pictures of the kit installed?


  4. #4
    Join Date
    Jun 2011
    Location
    Denmark, Copenhagen
    Posts
    577
    Rep Points
    548.1
    Mentioned
    14 Post(s)
    Rep Power
    6


    Yes Reputation No
    Will you ship this to Denmark?

  5. #5
    Join Date
    Jan 2013
    Location
    California
    Posts
    674
    Rep Points
    986.1
    Mentioned
    31 Post(s)
    Rep Power
    0


    Yes Reputation No
    Looks great.glws

  6. #6
    Join Date
    May 2010
    Location
    South Jersey
    Posts
    860
    Rep Points
    1,537.7
    Mentioned
    26 Post(s)
    Rep Power
    16



    Yes Reputation No
    Click here to enlarge Originally Posted by The Ghost Click here to enlarge
    Your kit looks great!
    Thank you! I kind of hate to part with it, but I no longer have the car!

  7. #7
    Join Date
    May 2010
    Location
    South Jersey
    Posts
    860
    Rep Points
    1,537.7
    Mentioned
    26 Post(s)
    Rep Power
    16



    Yes Reputation No
    Click here to enlarge Originally Posted by LQQKOUT Click here to enlarge
    Is that the real deal Garrett GT3582R turbo or an E-Bay knock off?
    Do you have any pictures of the kit installed?

    Yes, it is absolutely 100% genuine Garrett. I purchased it from Himni Racing. They have great prices!

    Here's a pic of the turbo installed. I ditched the intake pipe after this photo was taken because it was too restrictive. The silicone elbow was collapsing at just 16 psi. Running a filter right on the turbo turned out to be the way to go. Just to be clear, the intake will not be included with the kit since it didn't meet my standards.

    Click here to enlarge

  8. #8
    Join Date
    May 2010
    Location
    South Jersey
    Posts
    860
    Rep Points
    1,537.7
    Mentioned
    26 Post(s)
    Rep Power
    16



    Yes Reputation No
    I wouldn't be opposed to that as long as you cover the shipping charges. At this point, I don't have any idea what that would cost, though.

  9. #9
    Join Date
    May 2013
    Posts
    2,930
    Rep Points
    921.6
    Mentioned
    57 Post(s)
    Rep Power
    10


    Yes Reputation No
    GLWS! Great option for someone that was just looking for a Stage 2 turbo option, this would blow them away!
    2009 335i coupe back to stock...for now

    Click here to enlarge

  10. #10
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    119,467
    Rep Points
    32,151.1
    Mentioned
    2109 Post(s)
    Rep Power
    322


    Yes Reputation No
    Looks nice... GLWS.

    Stage 2 or 2.5 E9X M3 S65 V8 supercharger kit for sale
    : http://www.boostaddict.com/showthrea...r-kit-for-sale

  11. #11
    Join Date
    Jul 2010
    Location
    Encino,CA
    Posts
    8,039
    Rep Points
    5,733.6
    Mentioned
    179 Post(s)
    Rep Power
    58


    Yes Reputation No
    Fantastic kit and price.
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

  12. #12
    Join Date
    Jul 2011
    Location
    Omaha, NE
    Posts
    80
    Rep Points
    150.9
    Mentioned
    1 Post(s)
    Rep Power
    2


    Yes Reputation No
    Do you have a downpipe also? I'm interested, but I have an XI and I'm not sure if it will clear the transfer case.

  13. #13
    Join Date
    May 2010
    Location
    South Jersey
    Posts
    860
    Rep Points
    1,537.7
    Mentioned
    26 Post(s)
    Rep Power
    16



    Yes Reputation No
    Click here to enlarge Originally Posted by LQQKOUT Click here to enlarge
    Do you have a downpipe also? I'm interested, but I have an XI and I'm not sure if it will clear the transfer case.
    Yes, but I forgot to include that in the photo. There are a few other misc. pieces too that aren't shown. I currently have a deposit to buy from a member; but I will let everyone know if something happens. Thanks!

  14. #14
    Join Date
    May 2010
    Location
    South Jersey
    Posts
    860
    Rep Points
    1,537.7
    Mentioned
    26 Post(s)
    Rep Power
    16



    1 out of 1 members liked this post. Yes Reputation No
    Sold!!! Thanks for the interest! BimmerBoost > Tacos... Need I say more?

  15. #15
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    119,467
    Rep Points
    32,151.1
    Mentioned
    2109 Post(s)
    Rep Power
    322


    Yes Reputation No
    If anyone truly believes this site is better than tacos well then sir that is all the praise I would ever hope to hear.

    Stage 2 or 2.5 E9X M3 S65 V8 supercharger kit for sale
    : http://www.boostaddict.com/showthrea...r-kit-for-sale

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •